Vigor Machinery CO., LTD.

400° Vacuum Lamination Equipment

400° Vacuum Lamination Equipment

The heating platen is manufactured from special steel plate to avoid machine deformation even operating at 400°C. The heating platen is machined and ground through several processes. Flatness and parallelism accuracy on a single platen can reach ±0.015mm/m. Also, temperature tolerance can be controlled with in ±1.5°C.

FPC Roll to Roll Lamination CPC1-10

FPC Roll to Roll Lamination CPC1-10

It has employed two hydraulic cylinders for hot pressing with maximum uniformity. Besides, it is fully transparent appearance design makes it easy to check and maintain.


Vigor Machinery

Vigor Machinery CO., LTD. is Taiwan supplier and manufacturer in electronics, composites, plastics and rubber industries Vigor Machinery has been offering our customers high quality Lamination Press, PCB Lamination Press, Vacuum Lamination Press, FPCB Vacuum Quick Press, Laboratory Press, High temperature Press, Hot and Cold Press, Copper Foil Sheeter, Sheeter & Slitting, Resin Tester since 1988. With both advanced technology and 26 years experience, Vigor Machinery always make sure to meet each customer's demand.

150Ton FPCB Vacuum Quick Presses


Suitable for pressing cover ray on the flexible printing circuit board.

Vacuum High Speed Flexible Board Laminating Machine


  • Designed for single sheet pressing operations. The machine is compact constructed for working at any location in a room for space saving.
  • Accommodates instant glue for high production rate. Ideal for both sampling and mass production requirements.
  • Pre-pressing for single surface board is about 5 seconds, and about 15 ~ 60 seconds for top pressing. Pre-pressing for double surface board is about 5 seconds, and about 90 ~ 120 seconds for top pressing.
  • Easy to operate without special operation training is required.
  • The machine is based on vacuum pressing system, its vacuum status will be over than 10 Torr.
  • It capable of reducing the pressure for pressing process. To eliminate the finished product with curved problem after pressing process.
  • To add the operation life of auxiliary material effectively.
  • To reduce the imprint problem effectively.


Tonnage150 Tons150 Tons150 Tons
Ram DiameterØ355mmØ355mmØ355mm
Table Dimension600 x 600mm600 x 600mm600 x 660mm
Effective Pressing Area530 x 550mm530 x 550mm550 x 610mm
Pressure on PlatenMax 50 kg/cm² (Abjustable)Max 50 kg/cm² (Abjustable)Max 50 kg/cm² (Abjustable)
Working pressureNormal: 152kg/cm²
Max: 162kg/cm²
Normal: 152kg/cm²
Max: 165kg/cm²
Normal: 152kg/cm²
Max: 165kg/cm²
Electricity3Ø 220V/60HZ or 380V/50HZ
Power Consumpation21.5kw22kw22kw
Vacuum Degree20torr / 3sec20torr / 3sec
Machine Dimensions (L x W x H)1550 x 1200 x 1750mm1550 x 1200 x 1750mm1550 x 1200 x 1750mm
Machine DrawingVFPC1-15A (With light curtain)VFPC1-15V5 (With light curtain)VF-35V00B
TempratureMAX: 220°CMAX: 220°CMAX: 220°C
Temprature Accuracy180°C ± 3.5°C
180°C ± 3.5°C
180°C ± 3.5°C


  • Suitable for pressing cover ray on the flexible printing circuit board.


  • Copy right by VIGOR MACHINERY CO., LTD.
Files Download